Running a Sync Adapter

In the previous lessons in this class, you learned how to create a sync adapter component that encapsulates data transfer code, and how to add the additional components that allow you to plug the sync adapter into the system. You now have everything you need to install an app that includes a sync adapter, but none of the code you've seen actually runs the sync adapter.

You should try to run your sync adapter based on a schedule or as the indirect result of some event. For example, you may want your sync adapter to run on a regular schedule, either after a certain period of time or at a particular time of the day. You may also want to run your sync adapter when there are changes to data stored on the device. You should avoid running your sync adapter as the direct result of a user action, because by doing this you don't get the full benefit of the sync adapter framework's scheduling ability. For example, you should avoid providing a refresh button in your user interface.

You have the following options for running your sync adapter:

When server data changes

Run the sync adapter in response to a message from a server, indicating that server-based data has changed. This option allows you to refresh data from the server to the device without degrading performance or wasting battery life by polling the server.

When device data changes

Run a sync adapter when data changes on the device. This option allows you to send modified data from the device to a server, and is especially useful if you need to ensure that the server always has the latest device data. This option is straightforward to implement if you actually store data in your content provider. If you're using a stub content provider, detecting data changes may be more difficult.

When the system sends out a network message

Run a sync adapter when the Android system sends out a network message that keeps the TCP/IP connection open; this message is a basic part of the networking framework. Using this option is one way to run the sync adapter automatically. Consider using it in conjunction with interval-based sync adapter runs.

At regular intervals

Run a sync adapter after the expiration of an interval you choose, or run it at a certain time every day.

On demand

Run the sync adapter in response to a user action. However, to provide the best user experience you should rely primarily on one of the more automated options. By using automated options, you conserve battery and network resources.

The rest of this lesson describes each of the options in more detail.

Run the Sync Adapter When Server Data Changes

If your app transfers data from a server and the server data changes frequently, you can use a sync adapter to do downloads in response to data changes. To run the sync adapter, have the server send a special message to a BroadcastReceiver in your app. In response to this message, call ContentResolver.requestSync() to signal the sync adapter framework to run your sync adapter.

Google Cloud Messaging (GCM) provides both the server and device components you need to make this messaging system work. Using GCM to trigger transfers is more reliable and more efficient than polling servers for status. While polling requires a Service that is always active, GCM uses a BroadcastReceiver that's activated when a message arrives. While polling at regular intervals uses battery power even if no updates are available, GCM only sends messages when needed.

Note: If you use GCM to trigger your sync adapter via a broadcast to all devices where your app is installed, remember that they receive your message at roughly the same time. This situation can cause multiple instance of your sync adapter to run at the same time, causing server and network overload. To avoid this situation for a broadcast to all devices, you should consider deferring the start of the sync adapter for a period that's unique for each device.

The following code snippet shows you how to run requestSync() in response to an incoming GCM message:

       public class GcmBroadcastReceiver extends BroadcastReceiver {
    ...
    // Constants
    // Content provider authority
    public static final String AUTHORITY = "com.example.android.datasync.provider"
    // Account type
    public static final String ACCOUNT_TYPE = "com.example.android.datasync";
    // Account
    public static final String ACCOUNT = "default_account";
    // Incoming Intent key for extended data
    public static final String KEY_SYNC_REQUEST =
            "com.example.android.datasync.KEY_SYNC_REQUEST";
    ...
    @Override
    public void onReceive(Context context, Intent intent) {
        // Get a GCM object instance
        GoogleCloudMessaging gcm =
                GoogleCloudMessaging.getInstance(context);
        // Get the type of GCM message
        String messageType = gcm.getMessageType(intent);
        /*
         * Test the message type and examine the message contents.
         * Since GCM is a general-purpose messaging system, you
         * may receive normal messages that don't require a sync
         * adapter run.
         * The following code tests for a a boolean flag indicating
         * that the message is requesting a transfer from the device.
         */
        if (GoogleCloudMessaging.MESSAGE_TYPE_MESSAGE.equals(messageType)
            &&
            intent.getBooleanExtra(KEY_SYNC_REQUEST)) {
            /*
             * Signal the framework to run your sync adapter. Assume that
             * app initialization has already created the account.
             */
            ContentResolver.requestSync(ACCOUNT, AUTHORITY, null);
            ...
        }
        ...
    }
    ...
}
      

Run the Sync Adapter When Content Provider Data Changes

If your app collects data in a content provider, and you want to update the server whenever you update the provider, you can set up your app to run your sync adapter automatically. To do this, you register an observer for the content provider. When data in your content provider changes, the content provider framework calls the observer. In the observer, call requestSync() to tell the framework to run your sync adapter.

Note: If you're using a stub content provider, you don't have any data in the content provider and onChange() is never called. In this case, you have to provide your own mechanism for detecting changes to device data. This mechanism is also responsible for calling requestSync() when the data changes.

To create an observer for your content provider, extend the class ContentObserver and implement both forms of its onChange() method. In onChange() , call requestSync() to start the sync adapter.

To register the observer, pass it as an argument in a call to registerContentObserver() . In this call, you also have to pass in a content URI for the data you want to watch. The content provider framework compares this watch URI to content URIs passed in as arguments to ContentResolver methods that modify your provider, such as ContentResolver.insert() . If there's a match, your implementation of ContentObserver.onChange() is called.

The following code snippet shows you how to define a ContentObserver that calls requestSync() when a table changes:

       public class MainActivity extends FragmentActivity {
    ...
    // Constants
    // Content provider scheme
    public static final String SCHEME = "content://";
    // Content provider authority
    public static final String AUTHORITY = "com.example.android.datasync.provider";
    // Path for the content provider table
    public static final String TABLE_PATH = "data_table";
    // Account
    public static final String ACCOUNT = "default_account";
    // Global variables
    // A content URI for the content provider's data table
    Uri mUri;
    // A content resolver for accessing the provider
    ContentResolver mResolver;
    ...
    public class TableObserver extends ContentObserver {
        /*
         * Define a method that's called when data in the
         * observed content provider changes.
         * This method signature is provided for compatibility with
         * older platforms.
         */
        @Override
        public void onChange(boolean selfChange) {
            /*
             * Invoke the method signature available as of
             * Android platform version 4.1, with a null URI.
             */
            onChange(selfChange, null);
        }
        /*
         * Define a method that's called when data in the
         * observed content provider changes.
         */
        @Override
        public void onChange(boolean selfChange, Uri changeUri) {
            /*
             * Ask the framework to run your sync adapter.
             * To maintain backward compatibility, assume that
             * changeUri is null.
            ContentResolver.requestSync(ACCOUNT, AUTHORITY, null);
        }
        ...
    }
    ...
    @Override
    protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        ...
        // Get the content resolver object for your app
        mResolver = getContentResolver();
        // Construct a URI that points to the content provider data table
        mUri = new Uri.Builder()
                  .scheme(SCHEME)
                  .authority(AUTHORITY)
                  .path(TABLE_PATH)
                  .build();
        /*
         * Create a content observer object.
         * Its code does not mutate the provider, so set
         * selfChange to "false"
         */
        TableObserver observer = new TableObserver(false);
        /*
         * Register the observer for the data table. The table's path
         * and any of its subpaths trigger the observer.
         */
        mResolver.registerContentObserver(mUri, true, observer);
        ...
    }
    ...
}
      

Run the Sync Adapter After a Network Message

When a network connection is available, the Android system sends out a message every few seconds to keep the device's TCP/IP connection open. This message also goes to the ContentResolver of each app. By calling setSyncAutomatically() , you can run the sync adapter whenever the ContentResolver receives the message.

By scheduling your sync adapter to run when the network message is sent, you ensure that your sync adapter is always scheduled to run while the network is available. Use this option if you don't have to force a data transfer in response to data changes, but you do want to ensure your data is regularly updated. Similarly, you can use this option if you don't want a fixed schedule for your sync adapter, but you do want it to run frequently.

Since the method setSyncAutomatically() doesn't disable addPeriodicSync() , your sync adapter may be triggered repeatedly in a short period of time. If you do want to run your sync adapter periodically on a regular schedule, you should disable setSyncAutomatically() .

The following code snippet shows you how to configure your ContentResolver to run your sync adapter in response to a network message:

       public class MainActivity extends FragmentActivity {
    ...
    // Constants
    // Content provider authority
    public static final String AUTHORITY = "com.example.android.datasync.provider";
    // Account
    public static final String ACCOUNT = "default_account";
    // Global variables
    // A content resolver for accessing the provider
    ContentResolver mResolver;
    ...
    @Override
    protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        ...
        // Get the content resolver for your app
        mResolver = getContentResolver();
        // Turn on automatic syncing for the default account and authority
        mResolver.setSyncAutomatically(ACCOUNT, AUTHORITY, true);
        ...
    }
    ...
}
      

Run the Sync Adapter Periodically

You can run your sync adapter periodically by setting a period of time to wait between runs, or by running it at certain times of the day, or both. Running your sync adapter periodically allows you to roughly match the update interval of your server.

Similarly, you can upload data from the device when your server is relatively idle, by scheduling your sync adapter to run at night. Most users leave their powered on and plugged in at night, so this time is usually available. Moreover, the device is not running other tasks at the same time as your sync adapter. If you take this approach, however, you need to ensure that each device triggers a data transfer at a slightly different time. If all devices run your sync adapter at the same time, you are likely to overload your server and cell provider data networks.

In general, periodic runs make sense if your users don't need instant updates, but expect to have regular updates. Periodic runs also make sense if you want to balance the availability of up-to-date data with the efficiency of smaller sync adapter runs that don't over-use device resources.

To run your sync adapter at regular intervals, call addPeriodicSync() . This schedules your sync adapter to run after a certain amount of time has elapsed. Since the sync adapter framework has to account for other sync adapter executions and tries to maximize battery efficiency, the elapsed time may vary by a few seconds. Also, the framework won't run your sync adapter if the network is not available.

Notice that addPeriodicSync() doesn't run the sync adapter at a particular time of day. To run your sync adapter at roughly the same time every day, use a repeating alarm as a trigger. Repeating alarms are described in more detail in the reference documentation for AlarmManager . If you use the method setInexactRepeating() to set time-of-day triggers that have some variation, you should still randomize the start time to ensure that sync adapter runs from different devices are staggered.

The method addPeriodicSync() doesn't disable setSyncAutomatically() , so you may get multiple sync runs in a relatively short period of time. Also, only a few sync adapter control flags are allowed in a call to addPeriodicSync() ; the flags that are not allowed are described in the referenced documentation for addPeriodicSync() .

The following code snippet shows you how to schedule periodic sync adapter runs:

       public class MainActivity extends FragmentActivity {
    ...
    // Constants
    // Content provider authority
    public static final String AUTHORITY = "com.example.android.datasync.provider";
    // Account
    public static final String ACCOUNT = "default_account";
    // Sync interval constants
    public static final long MILLISECONDS_PER_SECOND = 1000L;
    public static final long SECONDS_PER_MINUTE = 60L;
    public static final long SYNC_INTERVAL_IN_MINUTES = 60L;
    public static final long SYNC_INTERVAL =
            SYNC_INTERVAL_IN_MINUTES *
            SECONDS_PER_MINUTE *
            MILLISECONDS_PER_SECOND;
    // Global variables
    // A content resolver for accessing the provider
    ContentResolver mResolver;
    ...
    @Override
    protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        ...
        // Get the content resolver for your app
        mResolver = getContentResolver();
        /*
         * Turn on periodic syncing
         */
        ContentResolver.addPeriodicSync(
                ACCOUNT,
                AUTHORITY,
                null,
                SYNC_INTERVAL);
        ...
    }
    ...
}
      

Run the Sync Adapter On Demand

Running your sync adapter in response to a user request is the least preferable strategy for running a sync adapter. The framework is specifically designed to conserve battery power when it runs sync adapters according to a schedule. Options that run a sync in response to data changes use battery power effectively, since the power is used to provide new data.

In comparison, allowing users to run a sync on demand means that the sync runs by itself, which is inefficient use of network and power resources. Also, providing sync on demand leads users to request a sync even if there's no evidence that the data has changed, and running a sync that doesn't refresh data is an ineffective use of battery power. In general, your app should either use other signals to trigger a sync or schedule them at regular intervals, without user input.

However, if you still want to run the sync adapter on demand, set the sync adapter flags for a manual sync adapter run, then call ContentResolver.requestSync() .

Run on demand transfers with the following flags:

SYNC_EXTRAS_MANUAL

Forces a manual sync. The sync adapter framework ignores the existing settings, such as the flag set by setSyncAutomatically() .

SYNC_EXTRAS_EXPEDITED

Forces the sync to start immediately. If you don't set this, the system may wait several seconds before running the sync request, because it tries to optimize battery use by scheduling many requests in a short period of time.

The following code snippet shows you how to call requestSync() in response to a button click:

       public class MainActivity extends FragmentActivity {
    ...
    // Constants
    // Content provider authority
    public static final String AUTHORITY =
            "com.example.android.datasync.provider"
    // Account type
    public static final String ACCOUNT_TYPE = "com.example.android.datasync";
    // Account
    public static final String ACCOUNT = "default_account";
    // Instance fields
    Account mAccount;
    ...
    @Override
    protected void onCreate(Bundle savedInstanceState) {
        super.onCreate(savedInstanceState);
        ...
        /*
         * Create the dummy account. The code for CreateSyncAccount
         * is listed in the lesson Creating a Sync Adapter
         */

        mAccount = CreateSyncAccount(this);
        ...
    }
    /**
     * Respond to a button click by calling requestSync(). This is an
     * asynchronous operation.
     *
     * This method is attached to the refresh button in the layout
     * XML file
     *
     * @param v The View associated with the method call,
     * in this case a Button
     */
    public void onRefreshButtonClick(View v) {
        ...
        // Pass the settings flags by inserting them in a bundle
        Bundle settingsBundle = new Bundle();
        settingsBundle.putBoolean(
                ContentResolver.SYNC_EXTRAS_MANUAL, true);
        settingsBundle.putBoolean(
                ContentResolver.SYNC_EXTRAS_EXPEDITED, true);
        /*
         * Request the sync for the default account, authority, and
         * manual sync settings
         */
        ContentResolver.requestSync(mAccount, AUTHORITY, settingsBundle);
    }